My 2016 Hellcat build and update post.

[Marc W]

@Marc W I'm sitting in the Tier 2 class right now and we just did a big discussion on the Holley smart coils. I bet I can get them up and running

I’m sitting at a diesel pump outside of Amarillo, TX right now on the way home from Florida. 1200 mile days on the road 😵‍💫

 

[RGPIII]

realized i hadnt updated this in a while the car is still undergoing changes but we are slowy getting it dialed in.

https://www.facebook.com/share/v/1ELgq4dpAU/?mibextid=wwXIfr

 

[Unholy707]

1800 go with a whipppe 3.8??

 

[16GoManGoHC2]

Go with turbos!!

 

[Unholy707]

Aaaaand he’s gone

 

[RGPIII]

1800 go with a whipppe 3.8??

YES SIR 3.8 WHIPPLE FTW!!!

Go with turbos!!

3.8 WHIPPLE!!!!

 

[Unholy707]

Are we talking crank or wheels?

 

[RGPIII]

https://youtube.com/shorts/ehJkraPSZ7M?si=npcXLRlWHmMvCsQG

 

[Linda's Hell Cat]

@RGPIII I have never seen a dyno like the one you are using.

What is the Brand name?


Congrats, you surely are making POWER!

~Linda

 

[RGPIII]

@RGPIII I have never seen a dyno like the one you are using.

What is the Brand name?


Congrats, you surely are making POWER!

~Linda

That is a Mainline Pro 6000 Hub dyno. bolts the the axles to eleminate any chance of tire slip and inproper readfings. they are the most accurate dynos at applying the proper load to get real life numbers.

https://mainlinedyno.com.au/index.php/dynamometers/prohub-extreme-2wd-axle-shaft

 

[fumanchu182]

I own one but Smurf hates me and refuses to visit me.

 

[RGPIII]

I own one but Smurf hates me and refuses to visit me.

25 minute ride beats out an hour and half for that buddy. I am planning a shop dyno day, for some customers, so ill be in touch.

 

[RGPIII]

well since that update the Stock BGE block said that was too much to handle. I hadn't even started to add power yet. so we are now on a 2500HP Dart build after teaming up with Byron from Modern Muscle Xtreme. MMX. car sounds a little different these days.

<iframe width="478" height="849" src="

" title="SMURFBUILT Hellcat aggressive cam chop!" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

 

[RGPIII]

View attachment IMG_4426.jpeg

 

[Linda's Hell Cat]

well since that update the Stock BGE block said that was too much to handle. I hadn't even started to add power yet. so we are now on a 2500HP Dart build after teaming up with Byron from Modern Muscle Xtreme. MMX. car sounds a little different these days.

<iframe width="478" height="849" src="

" title="SMURFBUILT Hellcat aggressive cam chop!" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Good Luck!

Hope to see you at the track!




~Linda

 

[RGPIII]

Had this little Gem for a few months debated on sharing or turning on the nitrous to see what it would do. With the temps getting crazy hot I figured why not. I won’t get the chance to make any decent passes below 90 degrees and 3500 DA for the next 3 months. This was on the old BGE block and build.

 

[RGPIII]

Decided to take a race against a known 6 second GTR this weekend. This is how it went!

<iframe width="560" height="315" src="

" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

 

[fumanchu182]

Still you killed it!

 

[CPO Super stock]

very impressed!

 

[RGPIII]

Stay tuned! i dropped MMX's newest creation the 460 cubic inch engine in my car over the weekend. will be on the dyno and at the track with it next weekend.