NEW - HHP Adjustable Tensioner Bracket for 6.2L Hellcat, Trackahwk & TRX

[HighHorseman]

These have been flying off the shelves since we released them, but we still have some available and on sale for Black Friday!
https://highhorseperformance.com/hh...er-charger-durango-srt-hellcat-trackhawk-trx/

Can't seem to find the right belt size? or maybe you're struggling to change belts when you change pulleys at the track. The new HHP Tensioner Bracket offers 5 different positions for your 6.2L belt tensioner. Click the link for more info!

 

[2ndgen]

If the center hole is 0", how many inches of belt length differ +/- for the other 4 holes?

 

[HighHorseman]

If the center hole is 0", how many inches of belt length differ +/- for the other 4 holes?

We haven't had an opportunity to measure the difference in inches in particular but it's about a 20 degree angle difference per hole. Of course, it will also depend on which belt tensioner is being used as well.

 

[Wizza]

Got mine on order....always had a suspicion of my oem tensioner effectiveness anyhow

 

[2ndgen]

I already have the Litens kit. Nice part--the pulleys are /much/ lighter than the stock ones. Total 2.8lbs less rotating mass between the three pulleys vs stock and much smoother bearings. (works out to 56% lighter between the 3 pulleys...)

 

[GNBRETT]

I was gonna opt for that but went with Sateras clutched pulley with griptech coating im guessing they do essentially the same thing.

I already have the Litens kit. Nice part--the pulleys are /much/ lighter than the stock ones. Total 2.8lbs less rotating mass between the three pulleys vs stock and much smoother bearings. (works out to 56% lighter between the 3 pulleys...)

 

[2ndgen]

I was gonna opt for that but went with Sateras clutched pulley with griptech coating im guessing they do essentially the same thing.

No, I'm talking about the Litens tensioner + idler set. Not the upper SC pulley.
Sure, the stock upper 3.17 is also a Litens.

 

[Wizza]

Ready to put mine on when it comes...hopefully they have them in stock

 

[Unholy707]

What’s the benefit of this over an idler pulley like AAD?