S O L D . Kerkey Light Weight Racing seat for Charger/Challenger. $1000.

[DRAGRCR]

Kerkey Light Weight Racing seat for Charger/Challenger. $1000. This is complete ready to bolt into the car. It is lightly used. It includes the 17" Kirkey 55 series seat painted black. A black tweed seat cover, a seat belt buckle, seat brackets, ALL Titanium bolts including the floor mounting bolts and a seat belt guide. It weighs 17 pounds total including everything.
This setup is good for 5'8" to about 6' Tall and 34 waist, so likely around 190 max if you are at 5'8" tall and up to something like 220 if you ae 6' tall. I am 5'9" tall and I have to stretch to get the gas pedal all the way down. But I got used to it.
I can deliver to Irwindale Drag Strip for free, to Las Vegas for $50 or to Phoenix for $75. If I ship it will be actual cost and the seat will be taken apart as needed to fit the box. Expect $200-$300 to ship.
Ron Silva

 

[DRAGRCR]

I can bring this to Irwindale This Thursday or This Saturday 5-6-2023 and install it for you. Just sayin.........

 

[Unholy707]

Ron is the man, someone buy this. About $1k in it just in parts right there not including the work to drill out/fab the brackets and mount everything nice

 

[DRAGRCR]

Ron is the man, someone buy this. About $1k in it just in parts right there not including the work to drill out/fab the brackets and mount everything nice

I don't think it is that obvious. The brackets are $210 before I even start cutting on them. $100 in TI Bolts, $120 for the belt guide and seat belt buckle. And, my God, spray paint, $5 !!!!! From Walmart

 

[Unholy707]

And the seat cover. Lots of money in parts here and you put it all together in a great package

 

[Unholy707]

I bought everything separate, although I went the slightly heavier route with a base and the planted side brackets. I bought the seatbelt guide and seat belt buckle (with your help). Lots of money piecing this together and then you have to measure, measure again and drill and source hardware. This is a great bolt in setup you have, ready to go. It should sell quickly I’d think

 

[Speedy!]

Somebody buy this, I've had a couple cocktails and feeling loose

 

[DRAGRCR]

I bought everything separate, although I went the slightly heavier route with a base and the planted side brackets. I bought the seatbelt guide and seat belt buckle (with your help). Lots of money piecing this together and then you have to measure, measure again and drill and source hardware. This is a great bolt in setup you have, ready to go. It should sell quickly I’d think

Once you get it all together put it on a scale and let us know what you come up with.................

 

[Marc W]

Buy it and be somebody 😂. It’s what I use 💪

 

[DRAGRCR]

Those RED seats look badd ass. Here is one I put together for a Demon.......I installed it at Red List.

TEST FIT in my Friends Demon I had at my house at the time...............

 

[DRAGRCR]

I have one of these setups in Southern California that is NEW. As well as the one here in Kingman AZ. I just checked again today. There is a solid $800 in parts here. I have at least 8 hours labor cutting down those brackets drilling holes deburring sanding and painting everything. You will not find anything lighter and you will not find anything like this that is complete and will drop in a challenger.

 

[DRAGRCR]

SOLD